Wherever a roll, drum or cylinder has to be heated or cooled while it turns, a rotary union is doing the job of moving water, steam, hot oil or air between a fixed pipe and a rotating shaft. That covers a very wide range of industries, and the conditions vary a great deal from one to the next.
Roto Flow Technologies India Private Limited manufactures and exports mono flow and dual flow rotary unions and rotary joints from Gujarat, India. Below you will find the industries we serve, the applications we see most often in each, and the products we usually recommend. Choose your industry to see the detail, or send us your requirement and we will match a union to your machine.
Each industry below has its own page covering typical machines, operating conditions and the right union for the duty.
Extrusion, film and sheet lines depend on exact roll temperature. We supply unions for chill rolls, calender rolls, embossing rolls and extruder cooling, mainly on water, hot oil and thermic fluid.
Calenders, mixing mills and curing equipment run hot and heavy. Steam, hot oil and high-pressure rotary joints keep rubber rolls and drums at temperature.
Steam-heated dryer cylinders and calender rolls are at the heart of paper making. Steam and thermic fluid rotary joints carry the heat in and return the condensate.
Drying cylinders, calenders and finishing machines need steady heat across the whole roll. We supply steam, hot oil and water rotary unions for textile processing.
Coating, laminating and cooling rolls need consistent temperature to protect film quality. Water, hot oil and multi-passage unions are the usual choice.
Continuous casting machines and rolling mills work in demanding, high-temperature conditions. Our continuous casting and high temperature rotary joints are built for the duty
Chill rolls and drying drums keep ink and coatings stable at press speed. Water and high speed rotary joints suit these rolls.
Drum dryers, flakers and heated or cooled rolls handle a range of process media. Thermic fluid, steam and high-pressure rotary unions are common here.
Cooking drums, cooling drums and drum dryers need clean, controlled heat transfer. Steam and water unions with stainless steel construction suit food plants.
Roll forming and rotating equipment in glass production need reliable cooling. Water and high temperature rotary joints support these applications.
Production of insulation materials relies on rotating equipment that must be heated or cooled continuously. We supply water, hot oil and steam unions to suit.
Machine tools and automotive production lines need coolant and air through rotating spindles and fixtures. Our coolant and high speed rotary unions are made for this duty.
If you already know the media or duty you need, go straight to the product page. The table shows what each range is best suited to.
| Product type | Best suited to |
|---|---|
| Water rotary joints | Chill rolls, cooling rolls and general cooling duty with clean or dirty water |
| Air rotary joints | Compressed air to expanding shafts, chucks and clutches |
| Oil rotary joints and hydraulic oil rotary joints | Oil and hydraulic oil service on rotating machinery |
| Hot oil rotary joints and thermic fluid rotary joints | Heated rolls and drums on thermal oil systems |
| Steam rotary joints | Steam-heated cylinders and drums |
| High pressure rotary joints | Duties with higher line pressure |
| High temperature rotary joints | Hot process media and heated equipment |
| High speed rotary joints | Fast-running rolls and spindles |
| Multi-passage rotary unions | Several media or heating and cooling zones through one unit |
| Continuous casting machine rotary joints | Continuous casting machines in steel plants |
| Continuous coolant service | Machine tool and coolant applications |
The right union depends on your media, temperature, pressure and speed far more than on your industry label. Gather these four details and our team can recommend a model quickly.
The machine and roll or drum you want to fit the rotary union to.
Water, hot oil, thermic fluid, steam or compressed air.
Your operating temperature and working pressure requirements.
Roll speed in RPM and the connection sizes required for installation.
we make, supply and export our own rotary unions and rotary joints.
a range that covers single-passage and supply-and-return duties.
our rotary unions are designed to be equivalent and replaceable with leading international makes.
Any industry that heats or cools rotating rolls, drums or cylinders uses them. Common examples are plastic, rubber, paper, textile, packaging and film, steel, printing, chemical, food, glass and machine tool manufacturing.
The terms are used interchangeably. Both describe a device that carries fluid or gas between a stationary pipe and a rotating part. You can read more in our article on the difference between rotary joints and rotary unions.
Yes. If your machine has a rotating roll, drum or shaft that needs heating, cooling or air, we can review the application. Send us the media, temperature, pressure and RPM.
Yes. Our rotary unions are designed to be equivalent and replaceable with leading international brands. Share the existing model number, a photo or a drawing and we will match it.
Yes. We supply customers across India and export rotary unions and rotary joints overseas.